To buy a new bicycle
for beginners or experienced road cyclists and triathletes.
The New Bike Fitting will generate empiracle data
through anatomical dimensions, measurements for range
of motion and an extensive evaluation of your requirements
to match you with the optimal new bicycle built and
fitted specifically for you. This removes the guess
work and amateur "research" from making
a bike buying decision. There is no better process
for selecting the optimal bicycle for performance,
comfort and safety. You will obtain the best bike
for your body dimensions and riding style. It is a
proven, tested, and refined "Six Sigma"
style process to optimize the bicycle purchasing/ownership
experience for beginners and expereinced cyclists.
Included in the Fitting for New Bicycle are:
27+ Body Dimension Measurements using three measurement
protocols.
Use of Serotta Size Cycle fitting bike to validate
bike geometry, dimensions and position.
F.I.S.T. and N.E.C.A. Certified bike fitting
techniques to optimize comfort and performance.
Tabulation of fitting statistics and frame dimensions/geometry
using FitKit Pro Software Systems along with permanent
storage of fit data in Bikesport, Inc. fit database.
Complete specific configuration of handlebar
stem angle and length, handlebar and aerobar width,
angle and dimensions, ergonomic positioning of
controls (brakes and transmission), dimension
specific crank length and chain rings, correct
cassette combination, optimal saddle selection
and positioning, correct seatpost adjustment and
orientation.
Complete shoe fitting, pedal system selection,
configuration of pedals and shoes, cleat alignment
and angulation using wedge systems and rotational
adjustment.
Tuning and adjustment of binding tension and
instruction on safe operation of clipless, automatic
safety style pedals.
Factory trained installation of cleats in compliance
with manufacturer standards. Our Director of Fitting
has been the technical representative for a top
clipless pedal company and and configured pedals
for two Tour de France winners, Olympic triathletes
and cyclists, World Championship Triathletes and
taught pedal configuration to other bicycle stores
around the United States.
Real-time video evaluation of fit and position.
Complete written Barnett Bicycle Academy delivery
checklist of finished bicycle including confirmation
of torque specs and Bicycle Buyer Agreement with
individual serial number.
Free complete re-fitting and
evaluation for one year from date of purchase.
Cost:
Free with purchase of new bike at Bikesport, Inc. or
$250 for purchase of bicycle elsewhere. Upgrades and
fit specific components add additional cost.
Refit of New Bike purchased at
Bikesport, Inc.
This is a follow-up fitting to tune and
improve the fit and position of your new bike from Bikesport.
It is provided at no charge on your new bike 3-6 months
after you have taken delivery up to one year following
the purchase. This includes:
Consultation for effectiveness
of original fit.
Evaluation and diagnosis of
fit/positional improvements.
Changes in positioning and components
required due to changes in conditioning.
Event specific positioning considerations
and changes.
Additional improvements of fit
and position to optimize comfort, performance and
safety.
Cost:
Refitting is for new bicycles purchased from us within
one year. There is generally no charge for a refit at
our discretion. Change of components, re-cabling and
excess mechnical work will result in reasonable upcharges
at our discretion.
Existing Fit for Road or Triathlon.
If you already own a road or triathlon
bicycle but need to improve your comfort, position and
performance this is the appropriate service. This is
the service to purchase if you are uncomofrtable, have
chronic saddle discomfort, are preparing for an event
or have not been previously fitted to your bicycle.
This process includes:
27+ Body Dimension Measurements
F.I.S.T. and N.E.C.A. Certified
bike fitting techniques to optimize comfort and
performance.
Recording of fitting statistics
and frame dimensions/geometry using FitKit Pro Software
Systems along with permanent storage of fit data
in Bikesport, Inc. fit database.
Complete evaluation and repositioning
of handlebar/aerobar size and angle, stem angle
and length, handlebar and aerobar width, angle and
dimensions, ergonomic positioning of controls (brakes
and transmission), dimension specific crank length
and chain rings, correct cassette combination, optimal
saddle selection and positioning, correct seatpost
adjustment and orientation.
Real-time video evaluation of
current fit and position and fit/position changes.
Evaluation of saddle height,
fore/aft, rotational angle, saddle setback, crank
length, reach, saddle to handlebar drop, aerobar
posture, elbow pad width and aerobar/base bar angle.
Measurement of joint angles
and alignment using laser and manual measuring apparatus.
Evaluation of Varis angle for
pedal and shoe configuration.
Complete evaluation of pedal
and shoe cleat position, binding tension, release
safety, rotational adjustment and "Q"
factor. Evaluation of shoe fit.
Replacement/installation/modification
of bicycle components to optimize comfort and fit.
Saddle and seatpost evaluation,
meausrement and modification.
Cost: Fitting
is $250. Labor for installation of components and additional
parts/components are additional. Total costs for Existing
fits range from $350- $1000+ depending on parts and
labor required.
Pedal System Configuration.
This is the service to purchase
if you need your new pedal and shoe system set-up, installed
and tested for safety and performance. This service
is also optimal for first time clipless pedal users
and includes training and familiarization on safe entry
and escape from modern automatic clipless pedal systems.
This includes:
Complete shoe fitting, pedal
system selection, configuration of pedals and shoes,
cleat alignment and angulation using wedge systems
and rotational adjustment.
Tuning and adjustment of binding
tension and instruction on safe operation of clipless,
automatic safety style pedals.
Factory trained installation
of cleats in compliance with manufacturer standards.
Our Director of Fitting has been the technical representative
for a top clipless pedal company and and configured
pedals for two Tour de France winners, Olympic triathletes
and cyclists, World Championship Triathletes and
taught pedal configuration to other bicycle stores
around the United States.
Explaination, demonstration
and practical application in use of your pedal system.
Evaluation of Varis angle for
pedal and shoe configuration and/or wedge compensation
fitting.
Complete evaluation of pedal
and shoe cleat position, binding tension, release
safety, rotational adjustment and "Q"
factor. Evaluation of shoe fit.
Testing of shoe/pedal interface,
engagement and safe disengagement.
Use of appropriate factory recommended
thread locking compounds, lubricants, hardware and
torque settings in compliance with ppublished standards
and recommendations to optimize comfort, performance
and safety.
